Remote_learning_universal_315_WITH_LOCK_annotated_RLY66X1B9LA0.jpg
Remote_learning_universal_315_WITH_LOCK_3__RLY67A4P7ZFF.jpg
Remote_learning_universal_315_WITH_LOCK__RM515T7EZYRZ.jpg
Also_available_RJYKGWR6ZWPF.png
Remote_learning_universal_433_ABCD_RFFA5Z63WBDZ.jpg
Remote_learning_universal_433_ABCD_2_RFFA5CXT2LYU.jpg
Remote_learning_universal_433_ABCD_3_RFFA5IYV11OX.jpg
REMOTE_KEYFOB_4_CH_315_BLK_RCHNF3YK5PGL.jpg
REMOTE_KEYFOB_4_CH_433_BLK_RCHNE4HHCP3H.jpg
Remote_learning_universal_433_type_2_annotated_RGEZ8ZNCHTCQ.jpg

Universal Self-Learning Remote Control 4 Button 315 MHz keyfob LE4

Regular price $12.80 Sale

Universal Self-Learning Remote Control 4 Button 315 MHz keyfob

Please check that your original is not rolling code and is compatible with the listed chipsets:
Weight: 80g

Frequency: 315 MHz,

Make additional remotes or replace a lost remote (must have an original to be able to copy)
• Self-learning remote control
• Useful for car alarms, home alarms, panic buttons, garage door, rolling curtain, etc.
• Learning face to face in few seconds
• Battery included
• Fixed code ASK modulation
315 MHZ
Batt 27A
• Voltage: 12V
Dimension: 50mm x 33mm x 10mm (L x W x H)
Please check that your original is not rolling code and is compatible with the listed chipsets
PT2240 PT2260 PT2262 EV1527 FP527 AX5326 PT2262 PT2242 HT600 HT680 HT6207 HT6010 HT6012 HT6014 AX5326-4 SMC5026 SMC5326-3 SMC5326-4 SMC918 SMC918-3
SMC918-4
2262 2260 5026-1 5026-2 5026-3 5026-4 FP527 SMC918 PT2240 EV1527 HT12D HT12E

How to set code
1, Slide the on/off switch forward to turn the remote on. Pressing button 1 (closest to the led) and button 3 simultaneously for longer than 3 seconds sets it into learn mode. At this time the blue led will flash on and off in cycle.
Release the buttons and bring the remote from which you want to copy close to the led end of the learning remote, simultaneously hold down the button to be copied and the associated button on the learning remote. After 4 secs the code will be copied, release the buttons.
Repeat these steps for the other remaining buttons.

2. . If you want to restore the previous codes that were loaded into the learning remote then push buttons 1 and 2 simultaneously for 3 secs.
Original codes will be restored

1 x Remote Control (Battery included)