TACHOMETER_HALL_LED_BLUE_3_RO64Q0D3CS8O.jpg
TACHOMETER_HALL_LED_GENERIC_2_RO62Q3EF6U8X.jpg
TACHOMETER_HALL_LED_GENERIC_RO62Q4RSNOYX.jpg
TACHOMETER_HALL_LED_GENERIC_WIRING_RO62Q2KG6ARC.jpg
TACHOMETER_HALL_LED_GENERIC_3_RO62Q3S4DVPS.jpg
Hall_effect_switch_tachometer_RO62Q1VDOF1W.jpg
TACHOMETER_HALL_LED_GENERIC_4_RO62Q49XWWW3.jpg
TACHOMETER_HALL_LED_GENERIC_5_RO62Q1EUO7YT.jpg
Hall_effect_switch_tachometer_mounting_2_RO6301G51TXJ.jpg
Hall_effect_switch_tachometer_mounting_RO630K5SQZ9X.jpg
Also_available_RJYKGWR6ZWPF.png
TACHOMETER_HALL_LED_BLUE_RO61Z8PPCBEF.jpg
TACHOMETER_HALL_LED_RED_2_RO61Z9ZYDYXZ.jpg
TACHOMETER_HALL_LED_RED_RO61ZAG898X1.jpg
magnet_12_x_2_RTP76HR8VM15.jpg

Tachometer DIESEL RPM display 8-28V dc Hall Effect non contact pickup BLUE BD1

Regular price $28.40 Sale

Tachometer DIESEL RPM display 8-28Vdc Hall Effect non contact pickup BLUE LED

Tachometer for fitting to any shaft, engine , prop shaft, gear shaft and give a readout on bright LED display. Ideal for Diesel engines and totally stand alone, no connection to computer or ECU required.
Easy to fit and accurate readout.
Mount the sensor and lock tight using the baking nuts, place the supplied magnet on shaft and check for correct operation, a gap of 1 to 10 mm is acceptable.
When fitting if unit fails to detect passing magnet it may be necessary to reverse the polarity of the magnet, once checked secure the magnet to the shaft with clamp or adhesive.

Specification:

LED Color BLUE
Working power supply:DC8-24V up to 40 mA
Measurement range : 5-9999 RPM.
Signal Pulse signal, Hall Effect NPN 3 wires normally open.
Response frequency: max 100HZ
Operating temperature: 0 to 50°C.
Display: LED 67 x 32 mm
Tachometer size: 79 x 42 x 25 mm.
Panel cutout size: 75 x 39 mm

Sensor
Hall proximity model: NJK-5002C or SJA12-10N1 20mA op current
Mounting M12 mm diameter thread with back nuts
Detection range: 1 - 10 mm
Detected objects: magnetic
Sensor size: 60 x 10 mm.
Sensor wire length: 1.2 m
Magnet:10 x 2 mm
Operating temperature: -10 to 60°C


Package includes
1 x NPN proximity switch
1 x 10 mm x 2 mm magnet
1 x connecting cable
1 x Tachometer LED BLUE (other colours avaiable)


.