Wireless_switch_1_ch_RNT806RS8ZFH.jpg
Wireless_switch_1_ch_4_RNT805I1WUO6.jpg
Wireless_switch_1_ch_5_RNT8053KWCQA.jpg
Wireless_switch_1_ch_6_RNT804S81HOA.jpg
Wireless_switch_1_ch_7_RNT804D7IUH4.jpg
Wireless_switch_1_ch_2_RNT806C1D7OW.jpg
Wireless_switch_1_ch_3_RNT805W943ZQ.jpg
Wireless_switch_1_ch_instructions_RO0GL1DNJ4LM.jpg
Also_available_RJYKGWR6ZWPF.png
4_Channel_wireless_rf_remote_control_switch_433_xtra_remote_R6NN30WSSV9F.jpg
Remote_keyfob_4_button_Buick_433_R13CPPUQUKUG.jpg
sonoff-rf_with_remote_RMA4T25KYPBO.jpg
switch_rf_4_ch_wireless_with_5_remote_RM0PIZ0ZW4HL.jpg
Remote_learning_universal_315_WITH_LOCK_3__RLY67A4P7ZFF.jpg
Remote_learning_universal_433_type_2_covered_RGEZ9ADEOAM5.jpg
Remote_learning_universal_433_type_2_annotated_RGEZ8ZNCHTCQ.jpg
Remote_learning_universal_433_ABCD_RFFA5Z63WBDZ.jpg
REMOTE_KEYFOB_4_CH_433_BLK_RCHNE4HHCP3H.jpg
Wireless_switch_1_ch_LAYOUT_RUN6HDI3OXEU.jpg

1 Channel 12V Wireless Remote Control module 433 Mhz YD8

Regular price $14.40 Sale

1 Channel 12V Wireless Remote Control Switch Module and remote.


Suitable for wireless control of
Garage doors, alarms, industrial control, electric and hydraulic control of horse float doors, alarms, lifts lights, winches, actuators, linear motors, central locking and much more etc
Output is c/o relay with clean contact output
This unit has 3 modes of output-
Momentary, latching and toggle, this is set using on board jumper.

This is the intelligent model that allows you to add more remotes later Similar units look the same but are far less versatile.
Small enough to tuck into a small space. Aerial can be extended out of module to increase range

Large remote in photo 1 can be added for extra $15 and additional keyfob remotes as in picture 12 for an extra $8 , can be added after module purchase.
Extra remotes also come complete with batteries.

Specifications:
Operating voltage: DC 12V
Operating Current: ≤ 6mA
Operating frequency: 433MHz
Operating temperature: -40 to + 80
Receiver sensitivity: ≥-105dbm
Output voltage: clean contact ( onboard jumper if 12V feed req )
Output Current: ≤ 10A
Code: Learning code. (Jog/ Non-Locked, Inter-lock/ locked, Auto-lock / Auto-Locked)

Whats shipped
1 x Receiver /relay module (black box)
1 x Remote Controller (keyfob) 27A batt fitted BE3



Tuff Stuff, Recon Recovery, Warn, Ramsey, Superwinch, Smittybilt, Gorilla, Bulldog winches, winch control